From: Brian (signal@xxxxxxxxxx)
Date: Sun Jun 10 2001 - 16:51:45 GMT-3
On Sun, 10 Jun 2001, Roman Rodichev wrote:
> it's simplier than that. If you have /24 OSPF route in your routing table,
> you can't "summarize" it (that term looses it's meaning actually) down to
> /25 using area-range
>
> And, by the way, I'm sorry I made a mistake. summary-address can't be used
> for OSPF->IGP summarization at all. Sorry
hmm, Roman are you sure about that last statment? If I have /28's or
/26's in my OSPF and would like them to appear in my other IGP's as /24's
instead, why can't I use summary-address? The purpose of summary-address
is to summarize from OSPF->non-OSPF IGP's. Perhaps I am confused about
something........
Brian
>
>
> >From: "michale_lee50@hotmail.com" <michael_lee50@hotmail.com>
> >To: "Roman Rodichev" <rodic000@hotmail.com>, <padhu@steinroe.com>,
> ><ccielab@groupstudy.com>
> >Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> >Redistributi on problem
> >Date: Sun, 10 Jun 2001 13:45:10 -0500
> >
> >scenario. I just need a way to inject the ospf /25 thro /30 as /28 into
> >IGRP...?? This is your question
> >
> >I have to say that is a strange one. Maybe I'm geting a little too old but
> >I
> >am under the impression that you want to redistribute a /28 into IGRP ?
> >mayby you want to redistribute an ospf network that is directly connected
> >into IGRP but that network is not downstrean so you can's use area-range
> >and
> >it's not coming into ospf so you can's use summary addres?
> >
> >is this the case?
> >
> >Mr.Lee
> >
> >----- Original Message -----
> >From: "Roman Rodichev" <rodic000@hotmail.com>
> >To: <michael_lee50@hotmail.com>; <padhu@steinroe.com>;
> ><ccielab@groupstudy.com>
> >Sent: Sunday, June 10, 2001 1:02 PM
> >Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> >Redistributi on problem
> >
> >
> > > Mr.Lee, you can't use summary-address and area range commands to go from
> > > shorter to longer bit mask.
> > >
> > > >From: "michale_lee50@hotmail.com" <michael_lee50@hotmail.com>
> > > >To: "Roman Rodichev" <rodic000@hotmail.com>, <padhu@steinroe.com>,
> > > ><ccielab@groupstudy.com>
> > > >Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> > > >Redistributi on problem
> > > >Date: Sun, 10 Jun 2001 12:56:20 -0500
> > > >
> > > >Guess I'm sort of late on this but I have to say that Policy routing is
> > > >certainly NOT the only way, you can accomplish this with the
> > > >summary-address
> > > >or the area-range in a given situation.
> > > >
> > > >Just hit the link and understand where and when to apply each command.
> > > >
> > > >Mr.Lee
> > > >----- Original Message -----
> > > >From: "Roman Rodichev" <rodic000@hotmail.com>
> > > >To: <padhu@steinroe.com>; <ccielab@groupstudy.com>
> > > >Sent: Friday, June 08, 2001 10:58 PM
> > > >Subject: Re: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> > > >Redistributi on problem
> > > >
> > > >
> > > > > you are wasting your time, policy routing is the only solution
> > > > >
> > > > > >From: "Padhu (LFG)" <padhu@steinroe.com>
> > > > > >Reply-To: "Padhu (LFG)" <padhu@steinroe.com>
> > > > > >To: "'ccielab@groupstudy.com'" <ccielab@groupstudy.com>
> > > > > >Subject: IGRP with /28 and ospf with /25, 26 , 27, 28,29,30 -
> > > >Redistributi
> > > > > >on problem
> > > > > >Date: Thu, 7 Jun 2001 21:49:24 -0500
> > > > > >
> > > > > >I know we have beaten the crap out of VLSM / FLSM scenario. Its
> >working
> > > > > >fine
> > > > > >with IGRP /24 and ospf having longer masks ...( with area ranges
> >and
> > > > > >summary
> > > > > >addresses blah blah etc) ..
> > > > > >
> > > > > >Now the reverse ...I know i can plug in the ip default network for
> >this
> > > >and
> > > > > >will work. However i am wondering if anyone on the list has got
> >this
> > > > > >working
> > > > > >without ip default network for this scenario. Summary-address and
> >area
> > > > > >ranges are so out of whack here i can't get this straight in this
> > > >reverse
> > > > > >scenario. I just need a way to inject the ospf /25 thro /30 as /28
> >into
> > > > > >IGRP...
> > > > > >
> > > > > >No Statics ofcourse.
> > > > > >
> > > > > >Appreciate any help. My ASBR is running 12.0(14).
> > > > > >
> > > > > >Or you can simply tell me i am wasting time to do the impossible
> >...(
> > > > > >Ofcourse i can't tell the proctor that)
> > > > > >
> > > > > >Cheers,Padhu
> > > > > >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:21 GMT-3