From: McCallum, Robert (Robert.McCallum@xxxxxxxxxxxxxxxxxx)
Date: Thu Jun 07 2001 - 13:14:33 GMT-3
Take out the command ntp source loopback 0. This doesn't serve any purpose.
Before any synchronisation will be done you have to make sure the master
router at least synchronizes with itself!!!!!
Try it and see
-----Original Message-----
From: Tomasz Bartel [mailto:tbartel@rubikon.pl]
Sent: 07 June 2001 09:24
To: ccielab@groupstudy.com
Subject: NTP questions
Guys,
Maybe it is simple to solve this problem but I don't know how to do this. I
have configured ntp server on 3620 router and clients on 2514. When I
reboot whole rack all routers looses synchronization.
What is the problem?
Configurations are very simple, on 3620:
ntp master
ntp source loopback 1
I know that should be also ntp update-calendar, but I can't put this
command (IOS c3620-d-mz_121-5_T8.bin). Actually there is no "ntp
update-calendar" command in my IOS.
On 25134
ntp server (loopback 1 address on 3620)
Every nets are reachable. I use OSPF.
Tomek
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:20 GMT-3