From: Bob Samuels (bobsamuels@xxxxxxxxxxxxx)
Date: Thu Jun 07 2001 - 13:19:14 GMT-3
Based on my experience, you are correct. The bandwidth parameter on the
interface also affects how data is reported to a SNMP server.
Bob
----- Original Message -----
From: "Rajeev Siddappa" <raj_lab@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, June 07, 2001 12:03 PM
Subject: Bandwidth Vs. Clockrate.
> Hi evry one,
>
> Consider a test lab environemnt, where I am using Back
> to back (DTE to DCE) serail cales to connect between
> routers.
>
> 1. If I change the bandwidth from 1.544 Mb to 64 Mbps
> will it affect the physical interace or will it
> only afftect the routing protocol. I belive that it
> only affects the routing protocol in computing &
> selting the right path. but the data will be pushed at
> the maximum avilable bandwidth.
>
>
> 2. If I change the clock rate, we are physically
> changing the rate at which the data is pushed on the
> interface, so it will have the right effet on the
> interface.
>
>
> Please correct me if I am wrong. Need u commets.
>
> Thanks,
> Rajeev.
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:20 GMT-3