From: Ken Snyder (phizzog@xxxxxxxx)
Date: Wed Jun 06 2001 - 19:45:04 GMT-3
Hi,
I have a router with one VIC-2FXS mod. and a phone in each voice port.
I can call from phone A to phone B without a problem. I need to configure
phone B to first dial "9", receive secondary dial tone, and then dial the
remote phone. I thought the prefix command was the solution but once I enter
"9" I get a busy tone. I tried a few options like a destination pattern
like: "9...." This will accept the "9" but does not provide a secondary dial
tone after the "9" is entered. I couldn't find much on CCO but this very
crude description:
For example, suppose there is a voice call whose E.164 called number
is
1(310) 555-2222. If you configure a destination-pattern of E.164 telephone
number, leaving the extension number of "2222." It that the actual numbers
dialed is "9, 2222." The comma in this example means that the router will
pause for one second between dialing the "9" and the "2" to allow for a
secondary dial tone.
This doesn't make sense to me and I couldn't find a similar config example.
I posted below the config I was using. I saved my config and reloaded the
router but that still didn't resolve the issue. Please let me know if anyone
has a good link, reference or solution to this problem.
dial-peer voice 10 pots
destination-pattern 1800
port 3/0/0
prefix 9,
dial-peer voice 20 pots
destination-pattern 1900
port 3/0/1
prefix 9,
Thanks!
-Ken
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3