Idea on IGRP/OSPF/ISDN Issue... take a look

From: Luke (luke.mendoza@xxxxxxxx)
Date: Wed Jun 06 2001 - 19:43:42 GMT-3

• Next message: Ken Snyder: "Secondary Dial Tone - POTS Peers"
• Previous message: Rick Stephens: "RE: How to find EIGRP hello-interval?"
• Next in thread: Roman Rodichev: "Re: Idea on IGRP/OSPF/ISDN Issue... take a look"
• Maybe reply: Roman Rodichev: "Re: Idea on IGRP/OSPF/ISDN Issue... take a look"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I know this has been beaten down, rehashed, and its probably getting really
old but....

I was looking thru the CD and I found this command in OSPF 12.0

neighbor database-filter

To filter outgoing LSAs to an OSPF neighbor, use the neighbor
database-filter router configuration command. To restore the forwarding of
LSAs to the neighbor.

neighbor ip-address database-filter all out

I was wondering if this could be used to filter out the type 5 LSAs that
gets propagated thru the network and brings up the ISDN line...

I know OSPF has a rule that ALL routers in one area have to have the same
LSAs in their database.

I haven't tried it because I don't have access to equipment right now but
will try tonight. Does anyone want to give this one a shot?

Thanks,

Luke
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Ken Snyder: "Secondary Dial Tone - POTS Peers"
• Previous message: Rick Stephens: "RE: How to find EIGRP hello-interval?"
• Next in thread: Roman Rodichev: "Re: Idea on IGRP/OSPF/ISDN Issue... take a look"
• Maybe reply: Roman Rodichev: "Re: Idea on IGRP/OSPF/ISDN Issue... take a look"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:19 GMT-3