From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Wed Jun 06 2001 - 03:29:32 GMT-3
Folks,
Scenario:
I had one router with a dialer-group statement calling another router
without the dialer statement. Dialer map and ppp authentication were in
place. The call is placed, but no traffic can go through. Pings fail, no
route exchange. When I configured 'dialer-group' on the called router
WITHOUT a 'dialer-list' statement, the pings were successful and routing
tables were updated.
Question:
Is a 'dialer-group' statement necessary in order to pass traffic through an
isdn line? Or, was this an IOS bug?
List of equipment used:
ISDN Simulator: Emutel Solo
Calling router: 2503 with 12.0(5)T ED Enterprise with IPSec 56
Called router: 4500 with 12.0(17) GD Enterprise with F/W and IPSec 56
Many thanks,
Daniel C. Young
Sr. Network Engineer
CCNP (ATM, Security & Voice Specialist),
CCDP, CCSE, MCSE+I
SBC Internet Data Center
(949) 221-1928 Work
(714) 350-8945 Cell
young@pobox.com
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3