From: Arthayuth.B@xxxxxxxxxxxxxxxxxx
Date: Tue Jun 05 2001 - 01:22:09 GMT-3
The right answer is dlsw icanreach mac-address 3003.3003.0000 mask
ffff.ffff.0000
-----Original Message-----
From: Roman Rodichev [mailto:rodic000@hotmail.com]
Sent: Tuesday, June 05, 2001 12:14 PM
To: rchoon@att.com; c_ccie@hotmail.com; ccielab@groupstudy.com
Subject: Re: ccbootcamp--lab 19
the thing to remember that icanreach mask works just like mask in ip route
statement, not like in access-list wildcard mask
so the solution is correct
>From: "Choon, Raymond ()" <rchoon@att.com>
>Reply-To: "Choon, Raymond ()" <rchoon@att.com>
>To: "'CCIE Cisco'" <c_ccie@hotmail.com>, ccielab@groupstudy.com
>Subject: ccbootcamp--lab 19
>Date: Mon, 4 Jun 2001 21:44:33 -0400
>
>I have a question about the answer in lab 19, section three, task two, #3
>in
>Advanced DLSW configuration
>
>The question asks not to send the MAC address 3003.3003.xxxx.
>
>The answer from ccbootcamp is:
>
> dlsw icanreach mac-address 3003.3003.0000 mask ffff.ffff.0000
>
>I would think the answer should be:
>
> dlsw icanreach mac-address 3003.3003.0000 mask 0000.0000.ffff
>
>
>Any comments??
>
>Raymond Choon
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:31:18 GMT-3