From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Sat May 26 2001 - 02:22:50 GMT-3
Change your config-register to 0x2101. That will make your flash eraseable.
----- Original Message -----
From: Steve Grewal <steve.grewal@jatt.com>
To: <ccielab@groupstudy.com>
Sent: Friday, May 25, 2001 9:30 PM
Subject: Router#erase flash
> Hello All:
>
> When executing the following command: erase flash, I receive the following
error message -
>
> Router#erase flash
> Erasing the flash filesystem will remove all files! Continue? [confirm]
> %dev_open: System flash not writable
> %Error erasing flash: (Device is read-only)
>
> This is the very first time I have experienced a problem such as this,
done research but didnt get any answers!
>
> Please advise...
>
> Thanks,
> Steve Grewal
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:54 GMT-3