From: Luke M (luke.mendoza@xxxxxxxx)
Date: Sat May 26 2001 - 01:06:25 GMT-3
Hello Guys,
ISDN won't stay down even if I put "IP OSPF DEMAND-CIRCUIT" on one end of
the link. I checked out the Bootcamp anwer and they have it so that R5 and
R6 have the command on both BRI interfaces.
I was also confused with the dialer-list on R5 which shows to deny
224.0.0.5. Here is a portion of the config.
access-list 100 deny ip any host 224.0.0.5
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
Which would make sense since R5 is the one who keeps dialing up to R6. I
believe the multicast address 224.0.0.5 is for OSPF DRs? I thought this was
not needed since I have the demand-circuit command.
I would appreciate any help or suggestions...
kinda tired as I have been studying for about 10 hours... I'm sure I am
missing something simple.
Luke
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:54 GMT-3