RE: DLSW ICANREACH

From: Andrew Lennon (andrew.lennon@xxxxxxxxxxxxx)
Date: Fri May 25 2001 - 11:46:53 GMT-3

Next message: Jim Graves: "Another redistribution/connected question"
Previous message: Martin, Chris: "Re: Virtual Links"
Maybe in reply to: Yasser Mousa: "DLSW ICANREACH"
Next in thread: Guy Farber: "RE: DLSW ICANREACH"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Yasser,

http://www.cisco.com/warp/public/697/dlswfilter.shtml

Andy

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Yasser Mousa
Sent: 25 May 2001 10:19
To: ccielab@groupstudy.com
Subject: DLSW ICANREACH

hI,

if u have 3 router peering with each other, R1,R2,R3 through dlsw .

R1 has the command dlsw icanreach mac-address aaaa.bbbb.cccc

both R2 and R3 receive the reachability information from R1.

How can I restrict so that only R2 receive this reachability information
about aaaa.bbbb.cccc from R1 and prevent R3 from receiving it.

thanks in advance
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html

Next message: Jim Graves: "Another redistribution/connected question"
Previous message: Martin, Chris: "Re: Virtual Links"
Maybe in reply to: Yasser Mousa: "DLSW ICANREACH"
Next in thread: Guy Farber: "RE: DLSW ICANREACH"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:53 GMT-3