DLSW ICANREACH

From: Yasser Mousa (ymousa@xxxxxxxxx)
Date: Fri May 25 2001 - 06:18:48 GMT-3

• Next message: Steve Munro: "RE: Cisco Secure ACS"
• Previous message: Tom Holloway: "RE: Serial Crossover Cable Alternatives"
• Next in thread: Ilya Mazhara: "Re: DLSW ICANREACH"
• Maybe reply: Ilya Mazhara: "Re: DLSW ICANREACH"
• Maybe reply: Andrew Lennon: "RE: DLSW ICANREACH"
• Maybe reply: Guy Farber: "RE: DLSW ICANREACH"
• Maybe reply: Andrew Lennon: "RE: DLSW ICANREACH"
• Maybe reply: Andrew Lennon: "RE: DLSW ICANREACH"
• Maybe reply: John Elias: "RE: DLSW ICANREACH"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
hI,

if u have 3 router peering with each other, R1,R2,R3 through dlsw .

R1 has the command dlsw icanreach mac-address aaaa.bbbb.cccc

both R2 and R3 receive the reachability information from R1.

How can I restrict so that only R2 receive this reachability information
about aaaa.bbbb.cccc from R1 and prevent R3 from receiving it.

thanks in advance
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Steve Munro: "RE: Cisco Secure ACS"
• Previous message: Tom Holloway: "RE: Serial Crossover Cable Alternatives"
• Next in thread: Ilya Mazhara: "Re: DLSW ICANREACH"
• Maybe reply: Ilya Mazhara: "Re: DLSW ICANREACH"
• Maybe reply: Andrew Lennon: "RE: DLSW ICANREACH"
• Maybe reply: Guy Farber: "RE: DLSW ICANREACH"
• Maybe reply: Andrew Lennon: "RE: DLSW ICANREACH"
• Maybe reply: Andrew Lennon: "RE: DLSW ICANREACH"
• Maybe reply: John Elias: "RE: DLSW ICANREACH"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:53 GMT-3