From: Yurchenko, Michael (michael.yurchenko@xxxxxxxxxxx)
Date: Sun May 20 2001 - 17:15:38 GMT-3
Plus you can't reverse telnet to the console port, so that's part of the
problem.
Michael Yurchenko
Sr. Network Engineer - Verizon Network Integration
CCIE# 6695, CCDP, CCNP ATM Specialist, MCSE
michael.yurchenko@verizon.com
610-407-2154
-----Original Message-----
From: Roman Rodichev [mailto:rodic000@hotmail.com]
Sent: Sunday, May 20, 2001 4:02 PM
To: DSiwula@dctc.com; ccielab@groupstudy.com
Subject: Re: router acting as a term server
Why did you connect R1's AUX to R2's AUX? Try this:
Laptop -> CON R1 AUX -> CON R2 AUX -> CON R3
>From: "David Siwula" <DSiwula@dctc.com>
>Reply-To: "David Siwula" <DSiwula@dctc.com>
>To: "Ccielab@Groupstudy. Com (E-mail)" <ccielab@groupstudy.com>
>Subject: router acting as a term server
>Date: Sun, 20 May 2001 12:38:03 -0700
>
>I have a question....
>Right now I do not have a actual terminal server and have 3 routers that
>I am making use with. The current setup is as follows....My laptop is
>connected to R1 via the Console Port. R1 is connected to R2 via the AUX
>Port. This allows me to console into R1 and use reverse telnet to
>navigate between R1 and R2. Is it possible for me to get to R3 through
>reverse telnet via Console Port. From R2 I would like to reverse telnet
>to R3 via their Console Port. I think the Console Port is line 0. So I
>have tried this and cannot get it to work. From R2 I enter telnet
>1.1.1.1 2000 and it is not accepted from foreign host. Not sure if
>anyone has tried this. Sorry if it is confussing.
>Thanks Dave
>
>R1 Aux------> Aux R2 Con---------->Con R3
>R1 Con----> Con Laptop
>
>By the way I have configured the Console Port on R2 and R3 for transport
>input telnet or all.
>**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:47 GMT-3