From: Roman Rodichev (rodic000@xxxxxxxxxxx)
Date: Sun May 20 2001 - 17:17:21 GMT-3
It will, you are right. But CON0 will also work.
P.S. When you set-up 2509 with 8 Async interfaces, you usually plug the
cables in CON interfaces on all the routers.
>From: "David Siwula" <DSiwula@dctc.com>
>To: "Roman Rodichev" <rodic000@hotmail.com>, <ccielab@groupstudy.com>
>Subject: RE: router acting as a term server
>Date: Sun, 20 May 2001 13:10:18 -0700
>
>For some reason I thought that one aux would have to be connected to
>another aux. As in aux to aux. That should work, I'll give it a shot.
>Dave
>
>-----Original Message-----
>From: Roman Rodichev [mailto:rodic000@hotmail.com]
>Sent: Sunday, May 20, 2001 1:02 PM
>To: David Siwula; ccielab@groupstudy.com
>Subject: Re: router acting as a term server
>
>
>Why did you connect R1's AUX to R2's AUX? Try this:
>
>Laptop -> CON R1 AUX -> CON R2 AUX -> CON R3
>
>
> >From: "David Siwula" <DSiwula@dctc.com>
> >Reply-To: "David Siwula" <DSiwula@dctc.com>
> >To: "Ccielab@Groupstudy. Com (E-mail)" <ccielab@groupstudy.com>
> >Subject: router acting as a term server
> >Date: Sun, 20 May 2001 12:38:03 -0700
> >
> >I have a question....
> >Right now I do not have a actual terminal server and have 3 routers
>that
> >I am making use with. The current setup is as follows....My laptop is
> >connected to R1 via the Console Port. R1 is connected to R2 via the
>AUX
> >Port. This allows me to console into R1 and use reverse telnet to
> >navigate between R1 and R2. Is it possible for me to get to R3 through
> >reverse telnet via Console Port. From R2 I would like to reverse telnet
> >to R3 via their Console Port. I think the Console Port is line 0. So
>I
> >have tried this and cannot get it to work. From R2 I enter telnet
> >1.1.1.1 2000 and it is not accepted from foreign host. Not sure if
> >anyone has tried this. Sorry if it is confussing.
> >Thanks Dave
> >
> >R1 Aux------> Aux R2 Con---------->Con R3
> >R1 Con----> Con Laptop
> >
> >By the way I have configured the Console Port on R2 and R3 for
>transport
> >input telnet or all.
> >**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:47 GMT-3