From: Dave (dswink@xxxxxxxxxxxxx)
Date: Sat May 19 2001 - 23:28:57 GMT-3
Jeongwoo,
Your config looks ok to me. Since this is the first time you have set up
terminal server, I have to ask; what kind of cable are you using between the
2509's async ports and the console ports on the other routers? It should be
the flat Cisco rollover cables (light blue or black) or you can use Cat5 in
a rollover pinout (not straight through or crossover).
I have gotten the noise and the overrun errors before when I had a bad
rollover cable. I hope this helps.
Dave Swink
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Jeongwoo Park
Sent: Saturday, May 19, 2001 7:29 PM
To: Ccielab@Groupstudy. Com
Subject: Terminal Server 2509 for the first time !!
Hi all
How can I get my 2509 terminal server to work?
Here is my config
TermServer#sh r
05:47:29: %SYS-5-CONFIG_I: Configured from console by consoleun
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname TermServer
!
enable password wams
!
ip subnet-zero
no ip domain-lookup
ip host r1 2001 1.1.1.1
ip host r2 2002 1.1.1.1
ip host r3 2003 1.1.1.1
!
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.255
no ip directed-broadcast
!
interface Ethernet0
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0
ip address 2.2.50.2 255.255.255.252
no ip directed-broadcast
no ip mroute-cache
no fair-queue
clockrate 64000
shutdown
!
interface Serial1
ip address 3.3.50.1 255.255.255.252
no ip directed-broadcast
clockrate 1300000
shutdown
!
ip classless
!
!
line con 0
line 1 8
no exec
transport input all
line aux 0
line vty 0 4
login
!
end
I have three other router that are r1, r2, and r3 respectively.
How can I get to r1, r2, or r3?
Isn't it this one? for example,
TermServer#r1
TermServer#r2
TermServer#r3
It did not work
I get "connection refused by remost host" error
and sometimes I get "Trying r2 (1.1.1.1, 2002)... Open" and get stuck.
I am using termserver for the first time.
Can someone guide me through how to use it?
In addition, here is output of "sh line"
TermServer#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
* 0 CTY - - - - - 6 1 0/0 -
* 1 TTY 9600/9600 - - - - - 3 2 0/0 -
* 2 TTY 9600/9600 - - - - - 2 0 0/0 -
3 TTY 9600/9600 - - - - - 1 0 0/0 -
4 TTY 9600/9600 - - - - - 0 0 0/0 -
5 TTY 9600/9600 - - - - - 0 104 0/0 -
6 TTY 9600/9600 - - - - - 0 0 0/0 -
7 TTY 9600/9600 - - - - - 1 0 81/243 -
8 TTY 9600/9600 - - - - - 0 6 208/622 -
9 AUX 9600/9600 - - - - - 0 0 0/0 -
10 VTY - - - - - 1 0 0/0 -
11 VTY - - - - - 0 0 0/0 -
12 VTY - - - - - 0 0 0/0 -
13 VTY - - - - - 0 0 0/0 -
14 VTY - - - - - 0 0 0/0 -
Thanks
jp
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to abuse@groupstudy.com
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3