From: P. Gregory (pgregory@xxxxxx)
Date: Sat May 19 2001 - 22:09:39 GMT-3
hello,
try
line con 0
transport input all
line vty 0 4
transport input all
depending on how you are accessing the TS
good luck everything else look good
ps. might change youe sub-net mask too a.b.c.d/8
----- Original Message -----
From: "Jeongwoo Park" <jpark@wams.com>
To: "Ccielab@Groupstudy. Com" <ccielab@groupstudy.com>
Sent: Saturday, May 19, 2001 8:29 PM
Subject: Terminal Server 2509 for the first time !!
> Hi all
> How can I get my 2509 terminal server to work?
> Here is my config
>
> TermServer#sh r
> 05:47:29: %SYS-5-CONFIG_I: Configured from console by consoleun
> Building configuration...
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname TermServer
> !
> enable password wams
> !
> ip subnet-zero
> no ip domain-lookup
> ip host r1 2001 1.1.1.1
> ip host r2 2002 1.1.1.1
> ip host r3 2003 1.1.1.1
> !
> !
> !
> interface Loopback0
> ip address 1.1.1.1 255.255.255.255
> no ip directed-broadcast
> !
> interface Ethernet0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface Serial0
> ip address 2.2.50.2 255.255.255.252
> no ip directed-broadcast
> no ip mroute-cache
> no fair-queue
> clockrate 64000
> shutdown
>
> !
> interface Serial1
> ip address 3.3.50.1 255.255.255.252
> no ip directed-broadcast
> clockrate 1300000
> shutdown
> !
> ip classless
> !
> !
> line con 0
> line 1 8
> no exec
> transport input all
> line aux 0
> line vty 0 4
> login
> !
> end
>
> I have three other router that are r1, r2, and r3 respectively.
> How can I get to r1, r2, or r3?
> Isn't it this one? for example,
> TermServer#r1
> TermServer#r2
> TermServer#r3
> It did not work
> I get "connection refused by remost host" error
> and sometimes I get "Trying r2 (1.1.1.1, 2002)... Open" and get stuck.
> I am using termserver for the first time.
> Can someone guide me through how to use it?
>
> In addition, here is output of "sh line"
>
> TermServer#sh line
> Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
Int
> * 0 CTY - - - - - 6 1
0 -
> * 1 TTY 9600/9600 - - - - - 3 2
0 -
> * 2 TTY 9600/9600 - - - - - 2 0
0 -
> 3 TTY 9600/9600 - - - - - 1 0
0 -
> 4 TTY 9600/9600 - - - - - 0 0
0 -
> 5 TTY 9600/9600 - - - - - 0 104
0 -
> 6 TTY 9600/9600 - - - - - 0 0
0 -
> 7 TTY 9600/9600 - - - - - 1 0
1/243 -
> 8 TTY 9600/9600 - - - - - 0 6
8/622 -
> 9 AUX 9600/9600 - - - - - 0 0
0 -
> 10 VTY - - - - - 1 0
0 -
> 11 VTY - - - - - 0 0
0 -
> 12 VTY - - - - - 0 0
0 -
> 13 VTY - - - - - 0 0
0 -
> 14 VTY - - - - - 0 0
0 -
> Thanks
>
> jp
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to abuse@groupstudy.com
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3