From: Kris Foster (kris@xxxxxxxxx)
Date: Sat May 19 2001 - 13:35:00 GMT-3
2600/3600's should be able to keep their time. The poor little 2500's
cannot.
Kris,
On Sat, 19 May 2001, Sandro Ciffali wrote:
> Sorry for the confusion, I meant if the NTP server is
> rebooted first it looses it's time.
>
> Sandro
>
> ----- Original Message -----
> From: "Mohamed Heeba" <MAHeeba@itqan.co.ae>
> To: "'Sandro Ciffali'" <sandyccie@yahoo.com>;
> <ccielab@groupstudy.com>
> Sent: Saturday, May 19, 2001 11:25 AM
> Subject: RE: Key chains with NTP
>
>
> > i didnt get that
> > when u configure your router to synch with NTP
> server and you reboot your
> > router ..it will synch again with the time server
> and get the valid time
> > may be i got you wrong ..but this is the idea of
> using NTP server
> > thx
> >
> > > -----Original Message-----
> > > From: Sandro Ciffali [SMTP:sandyccie@yahoo.com]
> > > Sent: Saturday, May 19, 2001 8:03 AM
> > > To: ccielab@groupstudy.com
> > > Subject: Key chains with NTP
> > >
> > > This topic was probably discussed I am not sure
> but i
> > > need some more thoughts on this one.
> > >
> > > I know the Proctors reboot the routers before
> checking
> > > the configs just to make sure the results remain
> same
> > > even after a router reboot.
> > >
> > > So if you have been asked to configure a routing
> > > protocol with authentication to accept a password
> for
> > > certain time period, You did this with NTP
> > > configuration, But when the routers reboot they go
> > > back to default time whcih is like 1992 or some
> year,
> > > So your NTP server will also go back in time then
> how
> > > do you expect it to work???
> > >
> > > Any thoughts on this???
> > >
> > > Thanks
> > >
> > > Sandro
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:45 GMT-3