From: Craig Hammer (Craig.Hammer@xxxxxxxxxx)
Date: Tue May 15 2001 - 10:09:01 GMT-3
Sounds like the ports have conflicting speed/duplex settings.
Craig Hammer
Senior Network Engineer
Parago, Inc.
972-538-3936
-----Original Message-----
From: tommyhu [mailto:tommyhu@wafersystems.com]
Sent: Tuesday, May 15, 2001 4:47 AM
To: ccielab@groupstudy.com
Subject: If Cisco 2924XL can connect with 3COM LinkSwitch 3000 ?
Hello Guys,
I have Cisco 2924XL and 3COM linkswitch 3000 ,but when I
connect them with a 100Base-Tx(crossover cable), the station on both
Catalyst 2924XL working is fine and on both 3Com LinkSwitch 3000 too. But
when
one PC inserted in 2924 ping other PC inserted in LS3000, the
performance is very poor , the loss packet rate is very high and
delay is very long.
I think these two product should can connect together.But maybe need
revise some default parameter , Pls tell me how to revise?
Thanks.
-- Best regards, tommyhu mailto:tommyhu@wafersystems.com **Please read:http://www.groupstudy.com/list/posting.html **Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3