From: Darren Ward (dward@xxxxxxxxxx)
Date: Tue May 15 2001 - 10:41:14 GMT-3
What are the error counters on each side of the link show?
Any late collisions. runts, giants etc?
Darren Ward
Craig Hammer wrote:
> Sounds like the ports have conflicting speed/duplex settings.
>
> Craig Hammer
> Senior Network Engineer
> Parago, Inc.
> 972-538-3936
>
> -----Original Message-----
> From: tommyhu [mailto:tommyhu@wafersystems.com]
> Sent: Tuesday, May 15, 2001 4:47 AM
> To: ccielab@groupstudy.com
> Subject: If Cisco 2924XL can connect with 3COM LinkSwitch 3000 ?
>
> Hello Guys,
> I have Cisco 2924XL and 3COM linkswitch 3000 ,but when I
> connect them with a 100Base-Tx(crossover cable), the station on both
> Catalyst 2924XL working is fine and on both 3Com LinkSwitch 3000 too. But
> when
> one PC inserted in 2924 ping other PC inserted in LS3000, the
> performance is very poor , the loss packet rate is very high and
> delay is very long.
>
> I think these two product should can connect together.But maybe need
> revise some default parameter , Pls tell me how to revise?
>
> Thanks.
>
> --
> Best regards,
> tommyhu mailto:tommyhu@wafersystems.com
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3