RE: NLSP over ATM

From: Ken Yeo (kenyeo@xxxxxxxxx)
Date: Sun May 13 2001 - 20:50:47 GMT-3


   
Sorry, the config I posted ealier will not work, here is the working config:
(PVC instead of SVC)

int atm 0

int atm 0.1 point-to-point
ip add 144.254.100.1 255.255.255.0
atm pvc 1 0 50 aal5nsap
ipx ipxwan
ipx nlsp enable

ipx router nlsp
area-address 0 0

-----Original Message-----
From: Rob Hopkins [mailto:rshopkins@earthlink.net]
Sent: Sunday, May 13, 2001 6:07 PM
To: Ken Yeo
Subject: Re: NLSP over ATM

could you post your configs?

Thanks,

Rob Hopkins

1.6180339887499
----- Original Message -----
From: "Ken Yeo" <kenyeo@email.com>
To: "Ken Yeo" <kenyeo@email.com>; <ccielab@groupstudy.com>
Sent: Sunday, May 13, 2001 6:45 PM
Subject: RE: NLSP over ATM

> I fixed it.
>
> Inverse arp solved the problem.
>
> Thanks,
> Ken
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Ken Yeo
> Sent: Sunday, May 13, 2001 12:10 PM
> To: ccielab@groupstudy.com
> Subject: NLSP over ATM
>
>
> Anyone tried NLSP over ATM yet?
>
> I couldn't setup NLSP over ATM, there are two issues:
>
> 1. NLSP must run in Point to Point subinterface. IOS does not allow me to
> setup Full NSAP or ESI addresses on ATM Point to Point subinterface. So I
> only have one option, use PVC.
>
> 2. IOS does not allow me to setup map-group in ATM point to point
> subinterface. So I am stuck. I can setup NLSP but there is not Layer 3
(IPX)
> to Layer 2 (ATM VC) mapping.
>
> Any ideas?
>
> Thanks,
> Ken Yeo
>
> ----
> r14(config-subif)#atm nsap-address
1000000000000000000000000000000000000200
> ATM: cannot configure NSAP on point-to-point sub-interfaces.
>
> r14(config-subif)#atm esi-address 00000000000001
> ATM: cannot configure ESI/NSAP on point-to-point sub-interface.
>
> r14(config-subif)#map-group svcipx3
> ATM: cannot configure map-group on point-to-point sub-interface.
> r14(config-subif)#
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:41 GMT-3