From: Dhana (sakthi_vel23@xxxxxxxxxxxxxx)
Date: Tue May 08 2001 - 07:16:21 GMT-3
Hi
Session target applied only at VoIP/ VoFr not on pots
eg
"dial-peer voice 100 voip "
cheers/
------------- Original Message --------------
"Daniel C. Young" <danyoung99@mediaone.net> wrote:
To:<ccielab@groupstudy.com>
From:"Daniel C. Young" <danyoung99@mediaone.net>
Date:Mon, 7 May 2001 22:20:43 -0700
Subject:"session target" command not working
Folks,
This is what I'm getting:
r1(config)#dial-peer voice 1 pots
r1(config-dial-peer)#session target ipv4:10.1.1.2
Incorrect format for Session Target
Must be of the form ^loopback:<compressed|uncompressed)$
I'm running 12.0.7T on the 2620. The IOS image is c2600-js-mz.120-7.T.bin
(enterprise plus, I believe).
Any suggestions? Can't seem to locate this one on the cco.
Daniel Young
Sr. Network Engineer
Internet Data Center
SBC Service Inc. - ITO
(949) 221-1928 Office
(714) 350-8945 Cell
ICQ# 109846891
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:36 GMT-3