From: Andy Singh (asingh@xxxxxxxxxxxxxxxxxxxx)
Date: Wed May 02 2001 - 15:57:05 GMT-3
if you have 12.0 ios, try " ip ospf network point-to-multi" under lo0
Andy Singh, CCIE #6821, CCNP, CCDP.
Network Engineer, Slam Dunk Networks
650-632-5568
www.slamdunknetworks.com
-----Original Message-----
From: Steve Clubb [mailto:sclubb@cattech.com]
Sent: Wednesday, May 02, 2001 11:41 AM
To: 'ccielab@groupstudy.com'
Subject: IGRP/OSPF summerization w/o default-routes
Here's the scenario -
(loop0 138.20.1.1/28) r1 ----------fr ospf/24----------- r5--------eth igrp
/24 ----------r6
redistributing ospf into igrp and igrp into ospf.
Loop0 on r1 is /28
router ospf 10
network 138.20.1.0 0.0.0.15 area 0
area 0 range 138.20.1.0 255.255.255.0
Yet r5 sees ospf network 138.20.1.1/32 and r6 doesn't see r1 loopback
(obviously)
Why can't r5 see network 138.20.1.0 as a /24? Appreciate your input.
Steve
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3