From: Russell Lusignan (rlusignan@xxxxxxxxxxxxxxx)
Date: Wed May 02 2001 - 16:53:05 GMT-3
I don't think you can use multipoint on loopbacks.. I believe it errors out
with "invalid type for interface"
ip ospf point-to-point will work though, then your loopback will show up as
a /28 in R5's ospf routing table
> -----Original Message-----
> From: Andy Singh [mailto:asingh@slamdunknetworks.com]
> Sent: Wednesday, May 02, 2001 2:57 PM
> To: 'Steve Clubb'; 'ccielab@groupstudy.com'
> Subject: RE: IGRP/OSPF summerization w/o default-routes
>
>
> if you have 12.0 ios, try " ip ospf network point-to-multi" under lo0
>
> Andy Singh, CCIE #6821, CCNP, CCDP.
> Network Engineer, Slam Dunk Networks
> 650-632-5568
> www.slamdunknetworks.com
>
>
>
> -----Original Message-----
> From: Steve Clubb [mailto:sclubb@cattech.com]
> Sent: Wednesday, May 02, 2001 11:41 AM
> To: 'ccielab@groupstudy.com'
> Subject: IGRP/OSPF summerization w/o default-routes
>
>
> Here's the scenario -
>
>
> (loop0 138.20.1.1/28) r1 ----------fr ospf/24-----------
> r5--------eth igrp
> /24 ----------r6
>
> redistributing ospf into igrp and igrp into ospf.
>
> Loop0 on r1 is /28
>
> router ospf 10
> network 138.20.1.0 0.0.0.15 area 0
> area 0 range 138.20.1.0 255.255.255.0
>
> Yet r5 sees ospf network 138.20.1.1/32 and r6 doesn't see r1 loopback
> (obviously)
>
> Why can't r5 see network 138.20.1.0 as a /24? Appreciate your input.
>
> Steve
> **Please read:http://www.groupstudy.com/list/posting.html
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3