From: Jaeheon Yoo (kghost@xxxxxxxxxxxx)
Date: Tue May 01 2001 - 19:01:25 GMT-3
on r3-dal,
--> "username r3-dal password 0 cisco" is wrong.
It should be like "username r5-dal password 0 cisco".
You can check this with "debug ppp authentication" before and after fixing
this.
Authentication is very important for building dialer maps. After
successfully authenticated, the remote host is identified with its username,
which can be mapped to one of configured dialer map statements with the same
remote host name .
Hope this helps.
Regards,
Jaeheon
----- Original Message -----
From: "Roger McNeace" <rmcneace@lucent.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, May 02, 2001 6:00 AM
Subject: Can't get ISDN to work:UPDATE2
>
> I fixed the dialer map, but I believe this has nothing to do with
> authentication. The ISDN simulator according to the LAB docs is set to
> 5ess. I have reset both routers and the switch but still receive the same
> error. I have also added a "debug isdn q921" output.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3