nlsp problem

From: Mohamed Heeba (MAHeeba@xxxxxxxxxxx)
Date: Tue May 01 2001 - 18:58:24 GMT-3

• Next message: Jaeheon Yoo: "Re: Can't get ISDN to work:UPDATE2"
• Previous message: Don Taylor II: "RE: Cannot get ISDN to work"
• Next in thread: Walter Chen: "RE: nlsp problem"
• Maybe reply: Walter Chen: "RE: nlsp problem"
• Maybe reply: Gonzales, Enrique: "RE: nlsp problem"
• Maybe reply: Ken Yeo: "Re: nlsp problem"
• Maybe reply: Masood Malik: "Re: nlsp problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
guys ;
im configuring nlsp over frame hub/spoke all physical interfaces are used .

None of the routers are able to get the adjancy .
im not able to enable the nlsp over the interface ,the router reject the
command .
the question is
how can i get nlsp run over frame relay ?? here is my configs .
notes: that the frame relay cloud and the router interfaces are in area 3 of
the nlsp,the frame pvcs are showing active

spoke 1

ipx routing 0000.0000.0003
ipx internal-network BB3300
!
interface Serial0
 no ip address
 encapsulation frame-relay
 no ip mroute-cache
 bandwidth 64
 ipx network BBBB00
 no fair-queue
 frame-relay map ipx BBBB00.0000.0000.0002 102 broadcast
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
!
interface TokenRing0
 no ip address
 no ip mroute-cache
 ipx network BBAA00 encapsulation SNAP
 ring-speed 16
!
!
ip classless
no logging console
!
!
!
ipx router nlsp area3
 area-address BB0000 FFFF0000
!
!
no ipx router rip
!

spoke 2

ipx routing 0000.0000.0005
ipx internal-network BB5500
!
interface Ethernet0
 no ip address
 no ip mroute-cache
  ipx network BB7700
 ipx nlsp area3 enable
!
interface Serial0
 no ip address
 no ip mroute-cache
 encapsulation frame-relay
 no ip route-cache
 bandwidth 64
 ipx network BBBB00
 no frame-relay inverse-arp
 frame-relay map ipx BBBB00.0000.0000.0002 102 broadcast
!

ip classless
no logging console
!
!
ipx router nlsp area3
 area-address BB0000 FFFF0000
!
!
no ipx router rip
!

HUB

ipx routing 0000.0000.0002
ipx internal-network BB2200
!
interface Loopback0
 no ip address
 no ip directed-broadcast
 ipx network AAAA03
!
interface Loopback1
 no ip address
 no ip directed-broadcast
 ipx network AAAA04
!
interface Ethernet0
 no ip address
 no ip directed-broadcast
 ipx network AAAA02
 ipx network AAAA01 encapsulation SAP secondary
 ipx nlsp area2 enable
!
interface Serial0
 bandwidth 64
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 no ip mroute-cache
 ipx network BBBB00
 frame-relay map ipx BBBB00.0000.0000.0003 103 broadcast
 frame-relay map ipx BBBB00.0000.0000.0005 105 broadcast
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
!
!
!
!
!
ipx router nlsp area3
 area-address BB0000 FFFF0000
!
!
ipx router nlsp area2
 area-address AAAA00 FFFFFFF0
!
!
no ipx router rip
!
!
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Jaeheon Yoo: "Re: Can't get ISDN to work:UPDATE2"
• Previous message: Don Taylor II: "RE: Cannot get ISDN to work"
• Next in thread: Walter Chen: "RE: nlsp problem"
• Maybe reply: Walter Chen: "RE: nlsp problem"
• Maybe reply: Gonzales, Enrique: "RE: nlsp problem"
• Maybe reply: Ken Yeo: "Re: nlsp problem"
• Maybe reply: Masood Malik: "Re: nlsp problem"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3