From: Rena A. hu (huaq@xxxxxxxxxxx)
Date: Tue May 01 2001 - 19:42:56 GMT-3
Could u try to change the username on R3 to r5-dal as following? You may
need to reset your simulator as well if you get stuck on layer 2.
username r5-dal password 0 cisco
Good luck and let me know if it works.
>From: "Roger McNeace" >Reply-To: "Roger McNeace" >To: >Subject: Can't
get ISDN to work:UPDATE2 >Date: Tue, 1 May 2001 17:00:17 -0400 > >I fixed
the dialer map, but I believe this has nothing to do with
>authentication. The ISDN simulator according to the LAB docs is set to
>5ess. I have reset both routers and the switch but still receive the
same >error. I have also added a "debug isdn q921" output. >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:30:32 GMT-3