Re: isis-troubleshooting

From: Johnny Dedon (johnny.dedon@xxxxxxxxxx)
Date: Fri Apr 27 2001 - 10:30:24 GMT-3


   
Ramesh,
Shouldn't your tunnel interfaces belong to the same nework? You have
10.1.1.5 on one end and 10.2.2.2 on the other. Sorry if I'm way off, I may
be missing the picture.

Johnny Dedon
Senior Staff Consultant
Exodus Professional Services
johnny.dedon@exodus.net
www.exodus.net
----- Original Message -----
From: "Ramesh Ramasamy" <ramesh_ramasamy@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Thursday, April 26, 2001 6:33 PM
Subject: isis-troubleshooting

> Hi,
>
> What am i missing in the config?. I am not able to ping loopback xyz -
> configured with 'ip router isis' from either side, but they show up
> as isis interfaces for 'show clns int'.
>
> Am redis connected /specific address which are used for tun src/desn and
are
> reachable from either side -r2/t5.
>
> isis on r5(tun 52) - r3 - r2(tun 25)isis
>
> r5:
> interface Tunnel52
> ip address 10.1.1.5 255.255.255.0
> no ip directed-broadcast
> ip router isis
> tunnel source 51.51.51.5
> tunnel destination 2.2.2.2
> r2:
> interface Tunnel25
> ip address 10.2.2.2 255.255.255.0
> no ip directed-broadcast
> ip router isis
> tunnel source 2.2.2.2
> tunnel destination 51.51.51.5
> I can ping the tunn src/des from either side.
>
> r2:show clns neig/route:
> r2#show clns route
> Codes: C - connected, S - static, d - DecnetIV
> I - ISO-IGRP, i - IS-IS, e - ES-IS
>
> C 00.0002 [2/0], Local IS-IS Area
> C 00.0002.0002.0002.0002.00 [1/0], Local IS-IS NET
>
> r2#show clns neig
>
> System Id Interface SNPA State Holdtime Type
> Protocol
> 0005.0005.0005 Tu25 51.51.51.5 Up 291 IS ES-IS
> r2#
> --
> r5:show clns neig/route
>
> r5#show clns nei
>
> System Id Interface SNPA State Holdtime Type
> Protocol
> 0002.0002.0002 Tu52 2.2.2.2 Up 252 IS ES-IS
> r5#show clns rout
> CLNS Prefix Routing Table
> 00.0001.0005.0005.0005.00, Local NET Entry
> r5#
>
> Thanks,
> Ramesh.



This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:59 GMT-3