From: Bob Chahal (bob.chahal@xxxxxxxxxxxx)
Date: Fri Apr 27 2001 - 10:36:52 GMT-3
I've just completed section 2, Task 2 no.21 and I can't seem to get my head
around what is going on here. I've checked the sample answers but I'm still
struglling with it.
I put an aggregate address on R7 for the networks 160.10.10.0 161.10.10.0
170.10.10.0
aggregate 160.0.0.0 240.0.0.0
all my routers can see the aggregate and the specific routes unless I do
some filtering etc but the model answers don't filter at all.
Has anyone found the same solution as Marc. For example in the supplied
solution R2 sees the above routes as BGP routes whereas in my routing tables
they appear as ext-type 2 OSPF routes which makes sense because BGP is being
redistributed into OSPF at R1 (and R6).
If any of you people have done this lab and have had no problems with this I
could sure do with some guidance. I understand aggregating routes,
suppressing and filtering more specific routes but I just don't the solution
for this.
Thanks
Bob
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:59 GMT-3