isis-troubleshooting

From: Ramesh Ramasamy (ramesh_ramasamy@xxxxxxxxxxx)
Date: Thu Apr 26 2001 - 20:33:52 GMT-3

   
Hi,

What am i missing in the config?. I am not able to ping loopback xyz -
configured with 'ip router isis' from either side, but they show up
as isis interfaces for 'show clns int'.

Am redis connected /specific address which are used for tun src/desn and are
reachable from either side -r2/t5.

isis on r5(tun 52) - r3 - r2(tun 25)isis

r5:
interface Tunnel52
ip address 10.1.1.5 255.255.255.0
no ip directed-broadcast
ip router isis
tunnel source 51.51.51.5
tunnel destination 2.2.2.2
r2:
interface Tunnel25
ip address 10.2.2.2 255.255.255.0
no ip directed-broadcast
ip router isis
tunnel source 2.2.2.2
tunnel destination 51.51.51.5
I can ping the tunn src/des from either side.

r2:show clns neig/route:
r2#show clns route
Codes: C - connected, S - static, d - DecnetIV
       I - ISO-IGRP, i - IS-IS, e - ES-IS

C 00.0002 [2/0], Local IS-IS Area
C 00.0002.0002.0002.0002.00 [1/0], Local IS-IS NET

r2#show clns neig

System Id Interface SNPA State Holdtime Type
Protocol
0005.0005.0005 Tu25 51.51.51.5 Up 291 IS ES-IS
r2# 

--
r5:show clns neig/route

r5#show clns nei

System Id      Interface   SNPA                State  Holdtime  Type
Protocol
0002.0002.0002 Tu52        2.2.2.2             Up     252       IS   ES-IS
r5#show clns rout
CLNS Prefix Routing Table
00.0001.0005.0005.0005.00, Local NET Entry
r5#

Thanks,
Ramesh.

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:58 GMT-3