From: Shane Miles (smiles@xxxxxxxxxx)
Date: Tue Apr 24 2001 - 13:17:46 GMT-3
Could you give some instructions on how to do this?
-----Original Message-----
From: bernard.moreon@socgen.co.uk [mailto:bernard.moreon@socgen.co.uk]
Sent: Monday, April 23, 2001 4:32 PM
To: louie kouncar
Cc: 'Andrew'; ccielab@groupstudy.com
Subject: Re[2]: Flash Upgrade
Louie,
Sorry to contradict you, but it is possible to have two 8Mb flash chips and
one
partition of 16Mb spread between the 2 chips. Here is my config:
R1#sh flash all
Partition Size Used Free Bank-Size State Copy Mode
1 16384K 14258K 2125K 8192K Read ONLY RXBOOT-FLH
System flash directory:
File Length Name/status
addr fcksum ccksum
1 14601136 /c2500-js56i-l.120-7.T.bin
0x40 0x4299 0x4299
[14601200 bytes used, 2176016 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
Chip Bank Code Size Name
1 1 89A0 2048KB INTEL 28F016SA
2 1 89A0 2048KB INTEL 28F016SA
3 1 89A0 2048KB INTEL 28F016SA
4 1 89A0 2048KB INTEL 28F016SA
1 2 89A0 2048KB INTEL 28F016SA
2 2 89A0 2048KB INTEL 28F016SA
3 2 89A0 2048KB INTEL 28F016SA
4 2 89A0 2048KB INTEL 28F016SA
Executing current image from System flash
R1#
You can notice that I've got one partition of 16Meg and my 2 Bank are
filled.
Bernard Moreon
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:54 GMT-3