From: Justin Menga (Justin.Menga@xxxxxxxxxxxxxxxxxx)
Date: Thu Apr 19 2001 - 06:12:28 GMT-3
The ip permit command just applies to telnet access to the Catalyst - that
is all you can control.
Regards,
Justin Menga CCIE #6640 CCNP+Voice CCDP MCSE+I CCSE
WAN Specialist
Computerland New Zealand
PO Box 3631, Auckland
DDI: (+64) 9 360 4864 Mobile: (+64) 25 349 599
mailto: justin.menga@computerland.co.nz
web: http://www.computerland.co.nz
CAUTION: This e-mail message and accompanying data may contain
information that is confidential and subject to privilege. If you are
not the intended recipient, you are notified that any use,
dissemination, distribution or copying of this message or data is
prohibited. If you have received this e-mail in error, please notify me
immediately and delete all material pertaining to this e-mail. Thank
you.
-----Original Message-----
From: Clifton Stewart [mailto:cliftonlstewart@home.com]
Sent: Thursday, April 19, 2001 8:44 PM
To: Huang HaiBo; ccielab@groupstudy.com
Subject: Catlyst 5000
Huang,
Try setting the port security for the mac-address. This is actually useful
to prevent using from plugging hosts into incorrect VLANs, causing a
troubleshooting nightmare.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/
set_po_r.htm#16989
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/
sh_a_c.htm#18219
Then use the set ip permit command to specify a particular ip address.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/
set_f_l.htm#10190
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/
sh_l_mi.htm#41202
-Cliff
Huang HaiBo wrote:
> Hi,
>
> I have one question about the catalyst 5000:
>
> There is one port 2/10 in the catalyst 5000 as drop point, only let a
Laptop to use the drop, only permit MAC=00-12-34-56-78-22 and IP address
10.10.10.10 to access this drop point.
>
> I think Cat5000 is layer 2 equipment, how to make it to the lay3 ip
address?
>
> HHB
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:50 GMT-3