From: Clifton Stewart (cliftonlstewart@xxxxxxxx)
Date: Thu Apr 19 2001 - 05:44:09 GMT-3
Huang,
Try setting the port security for the mac-address. This is actually useful to p
revent using from plugging hosts into incorrect VLANs, causing a troubleshootin
g nightmare.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/set
_po_r.htm#16989
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/sh_
a_c.htm#18219
Then use the set ip permit command to specify a particular ip address.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/set
_f_l.htm#10190
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_4/cmd_ref/sh_
l_mi.htm#41202
-Cliff
Huang HaiBo wrote:
> Hi,
>
> I have one question about the catalyst 5000:
>
> There is one port 2/10 in the catalyst 5000 as drop point, only let a Lapt
op to use the drop, only permit MAC=00-12-34-56-78-22 and IP address 10.10.10.1
0 to access this drop point.
>
> I think Cat5000 is layer 2 equipment, how to make it to the lay3 ip addres
s?
>
> HHB
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:50 GMT-3