From: BIKEMAN (krode@xxxxxxxxxxx)
Date: Wed Apr 18 2001 - 04:00:48 GMT-3
You have to assign DLSW to the ports needed 1981-83, 2065. Check the DLSW
design guide for a great explanation on this (the 165 page version)
Rudi
----- Original Message -----
From: "Huang HaiBo" <huanghb@mdcl.com.cn>
To: <ccielab@groupstudy.com>
Sent: Wednesday, April 18, 2001 1:00 PM
Subject: bandwidth lacation
> Hi, all
>
> I have a question:
>
> How to location bandwidth in the serial 0, dlsw 50%, ip 25%, ipx 25%.
And dlsw mixed size 512 bytes, ipx mixed size 1024 bytes, ip mixed size 256
bytes.
>
> could I do like this:
>
> queue-list 1 protocol 1 tcp 2065
> queue-list 1 protocol 1 tcp 2067
> queue-list 1 protocol 1 ipx 2
> queue-list 1 protocol 1 ip 3
> queue-list 1 queue 1 byte-count 2048
> queue-list 1 queue 2 byte-count 1024
> queue-list 1 queue 3 byte-count 1024
>
> question is: Do I need default queue? DLSW can indicate like this?
>
> Huang
> **Please read:http://www.groupstudy.com/list/posting.html
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:48 GMT-3