From: David Anderson (dma@xxxxxxxxx)
Date: Wed Apr 18 2001 - 02:46:11 GMT-3
Here is the spot where everyone should be able to access it:
http://www.cisco.com/warp/public/cc/pd/ibsw/ibdlsw/prodlit/dlsw5_rg.htm
Look for Determining the byte count, about 3/4 of the way down.
I am a little tired, so I am just going to ignore the comment about the
Real World......
At 01:10 AM 4/18/2001 -0400, David C Prall wrote:
>----- Original Message -----
>From: "David Anderson" <dma@cisco.com>
> > This is a very good explanation of bandwidth allocation using custom
> > queuing. Specifically how to figure out what your byte count should be
>for
> > each percentage.
> >
> >
>http://www-tac.cisco.com/Support_Library/Internetworking/IBM_Info/DLSw+/desi
>gn_guide/dlsw_dg_chap5.htm
> >
>
>Yes it is a wonderful site for Cisco Employees. Unfortunately, those in the
>real world don't have access to the site.
>
>David C Prall dcp@dcptech.com http://dcp.dcptech.com
>**Please read:http://www.groupstudy.com/list/posting.html
David Anderson
Network Design Engineer
Enterprise Solutions Architecture & Design
(408) 853-5515
dma@cisco.com
| |
..:|||||||:...:|||||||:..
C I S C O S Y S T E M S
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:48 GMT-3