DLSw+ Over Frame

From: Tariq Sharif (tariq_sharif@xxxxxxxxxxxxxx)
Date: Sun Apr 15 2001 - 13:00:39 GMT-3

• Next message: Mannan Venkatesan: "Re: BGP aggregates and IGRP default networks - policy routing is the answer"
• Previous message: Dhana: "Re: IPX DDR and Callback"
• Next in thread: Rob Hopkins: "Re: DLSw+ Over Frame"
• Maybe reply: Rob Hopkins: "Re: DLSw+ Over Frame"
• Maybe reply: Mas: "RE: DLSw+ Over Frame"
• Maybe reply: Tariq Sharif: "RE: DLSw+ Over Frame"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Need help with DLSw+ Over Frame. I can't get a DLSw+ session between 2 spoke
routers. The only way I can getting it to work is to have sessions between
each spoke & the hub. See configs below. Any ideas if I can have a DLSw+
session between 2 spoke routers? Any references for good configs?

Many thanks & regards.

Tariq Sharif

hostname HUB
!
dlsw local-peer peer-id 140.1.11.5
dlsw remote-peer 0 frame-relay interface Serial1/0 66 pass-thru
dlsw remote-peer 0 frame-relay interface Serial1/0 33 pass-thru
!
interface Loopback0
 ip address 140.1.11.5 255.255.255.252
 no ip directed-broadcast
!
interface Serial1/0
 ip address 140.1.5.2 255.255.255.0
 no ip directed-broadcast
 encapsulation frame-relay
 ip ospf network point-to-multipoint
 no ip mroute-cache
 logging event subif-link-status
 logging event dlci-status-change
 no fair-queue
 clockrate 64000
 frame-relay map dlsw 33 broadcast
 frame-relay map dlsw 66 broadcast
!
router ospf 1
 network 0.0.0.0 255.255.255.255 area 0
end

hostname SPOKE1
!
!
!
dlsw local-peer peer-id 140.1.11.9
dlsw remote-peer 0 tcp 140.1.11.29
dlsw remote-peer 0 frame-relay interface Serial0/0 22 pass-thru
dlsw bridge-group 1
!
!
!
interface Loopback0
 ip address 140.1.11.9 255.255.255.252
 no ip directed-broadcast
!
interface Ethernet0/0
 ip address 140.1.2.3 255.255.255.192
 no ip directed-broadcast
 shutdown
 bridge-group 1
!
interface Serial0/0
 ip address 140.1.5.3 255.255.255.0
 no ip directed-broadcast
 encapsulation frame-relay
 ip ospf network point-to-multipoint
 no ip mroute-cache
 logging event subif-link-status
 logging event dlci-status-change
 no fair-queue
 clockrate 64000
 frame-relay map dlsw 22
 frame-relay map ip 140.1.5.6 22 broadcast
!
router ospf 1
 network 0.0.0.0 255.255.255.255 area 0
end
hostname SPOKE2
!

dlsw local-peer peer-id 140.1.11.21
dlsw remote-peer 0 frame-relay interface Serial0/0 22 pass-thru
!
!
!
interface Loopback0
 ip address 140.1.11.21 255.255.255.252
 no ip directed-broadcast
!
interface Ethernet0/0
 ip address 140.50.50.11 255.255.255.0
 no ip directed-broadcast
 shutdown
!
interface Serial0/0
 ip address 140.1.5.6 255.255.255.0
 no ip directed-broadcast
 encapsulation frame-relay
 ip ospf network point-to-multipoint
 no ip mroute-cache
 logging event subif-link-status
 logging event dlci-status-change
 frame-relay map dlsw 22
 frame-relay map ip 140.1.5.3 22 broadcast
 frame-relay lmi-type cisco
!
router ospf 1
 network 0.0.0.0 255.255.255.255 area 0
!
end

[GroupStudy.com removed an attachment of type application/ms-tnef which had a n
ame of winmail.dat]
**Please read:http://www.groupstudy.com/list/posting.html

• Next message: Mannan Venkatesan: "Re: BGP aggregates and IGRP default networks - policy routing is the answer"
• Previous message: Dhana: "Re: IPX DDR and Callback"
• Next in thread: Rob Hopkins: "Re: DLSw+ Over Frame"
• Maybe reply: Rob Hopkins: "Re: DLSw+ Over Frame"
• Maybe reply: Mas: "RE: DLSw+ Over Frame"
• Maybe reply: Tariq Sharif: "RE: DLSw+ Over Frame"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:46 GMT-3