From: Dhana (sakthi_vel23@xxxxxxxxxxxxxx)
Date: Sun Apr 15 2001 - 12:45:07 GMT-3
Hi Nigel
1. The callback is done by ppp or isdn layer not at layer 3 (IP or IPX) so call
back ie nothing do with ip or ipx.
2. you need deny diagnostic, serialization and broadcast traffics.
Check this url
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/cs008.htm
Regards
Sakthi
------------- Original Message --------------
"Nigel Taylor" <nigel_taylor@hotmail.com> wrote:
To:"CCIE_Lab Group Study" <ccielab@groupstudy.com>
From:"Nigel Taylor" <nigel_taylor@hotmail.com>
Date:Sun, 15 Apr 2001 11:29:17 -0400
Subject:IPX DDR and Callback
All,
I was going through some IPX DDR and I'm having problems getting ISDN
callback to work. Also, I checked the
archives and the other problem I'm having is keeping the line quiet. I keep
getting broadcast (FFFF.FFFF.FFFF) listed as interesting traffic on my
"dialer-list 1 protocol ipx list 901" which has the following;
access 901 deny any any all any rip
access 901 deny any any all any sap
access 901 deny any any all any 457
access 901 deny any any all any all
the only way I got the line to keep quiet was using the additional statement
access 901 deny any any all node.FFFF.FFFF.FFFF
On the interface I am using "ipx watchdog spoof" and "ipx spx-spoof".
I've searched the Doc CD & CCO and found no sample configs of IPX callback..
Does this mean that it only configured with IP in which case IP does the
callback..?
TIA
Nigel..
**Please read:http://www.groupstudy.com/list/posting.html
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:46 GMT-3