From: daneyon hansen (daneyonhansen@xxxxxxxxxxx)
Date: Fri Apr 13 2001 - 04:26:24 GMT-3
I am lost on setting up a router as a TFTP server. The docs I have say on
the router that will act as a TFTP server do tftp-server from global config.
I am tryin to practice auto install, and I am going NO where. From the
remote router that I am tring to copy it's config so I can later pull it
back via auto install, I used the ip helper address, and this is JUST over
ethernet. When I try the copy this is what I get:
r2#copy start tftp
Address or name of remote host []? 10.0.92.9
Destination filename [r2-confg]?
TFTP: error code 2 received - Access denied
%Error opening tftp://10.0.92.9/r2-confg (Undefined error)
I then placed an ACL to per any, still the same thing?
The far route R9 has this for the TFTP config:
tftp-server nvram:
Can someone please HELP!
Daneyon
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:45 GMT-3