From: Darren Ward (dward@xxxxxxxxxx)
Date: Sun Apr 08 2001 - 01:30:43 GMT-3
In what IOS is the "interface-local" command available.
I can't find it in either 12.0.16 or 12.1.5T4 both running Enterprise
feature sets.
A search on CCO also revealed no exact match for the command in
quotes.......
Darren
Travis Anderson wrote:
> Markus,
>
> Put a frame-relay map command in for your local IP address or the
> frame-relay interface-local command and you'll be able to ping the
> interface.
>
> Travis
>
> -----Original Message-----
> From: mh [mailto:mh@nmc-m.dtag.de]
> Sent: Thursday, April 05, 2001 3:10 PM
> To: ccielab
> Cc: mh
> Subject: FRame-Relay Issue
>
> Hi,
>
> I want to ping my own Interface adress with Frame-Relay encapsulation.
> But it doesn't work. Here's the interface config:
>
> R3#sh run int ser 0
> Building configuration...
>
> Current configuration:
> !
> interface Serial0
> bandwidth 1984
> ip address 10.1.10.2 255.255.255.252
> no ip directed-broadcast
> encapsulation frame-relay
> no keepalive
> frame-relay interface-dlci 100
> end
>
> R3#ping 10.1.10.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.1.10.2, timeout is 2 seconds:
> .....
> Success rate is 0 percent (0/5)
> R3#
> R3#ping 10.1.10.1
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 10.1.10.1, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 4/5/8 ms
> R3#sh frame
> R3#sh frame-relay map
> R3#sh frame-relay map
> Serial0 (up): ip 10.1.10.1 dlci 100(0x64,0x1840), dynamic,
> broadcast,
>
> Maybe it works with a trick.
> Have somebody a soutlion for me ?
>
> Markus
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:42 GMT-3