From: fwells12 (fwells12@xxxxxxxxxxx)
Date: Sun Apr 08 2001 - 01:44:03 GMT-3
You can use 'PPP auth pap' or not specify any authentication at all.
----- Original Message -----
From: tok cok <tokcok@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, April 08, 2001 3:23 AM
Subject: Encap PPP over ISDN
> Guys,
> for isdn bri, if I use 'encap ppp' and I don't want to use chap, can this
be
> done? Is it that when there is encap ppp, chap must also be enable?
>
> Below is my config.
>
> Router 1
> !
> interface BRI0
> ip address 137.10.6.6 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 60
> dialer map ip 137.10.6.5 bro 2333221
> dialer-group 1
> !
> -----------------------------------
> Router 2
> !
> interface BRI0
> ip address 137.10.6.5 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> dialer idle-timeout 60
> dialer map ip 137.10.6.6 bro 2333222
> dialer-group 1
> !
>
> I didn't specify username password. When I do a debug it say
encapsulation
> fail. But when I specify username password and enable ppp chap.
Everything
> goes fine.
>
> So is it that when encap ppp is used chat must also enable?
>
> Cheers!
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:42 GMT-3