From: Markus Haas (mh@xxxxxxxxxxxxx)
Date: Thu Apr 05 2001 - 17:10:02 GMT-3
Hi,
I want to ping my own Interface adress with Frame-Relay encapsulation.
But it doesn't work. Here's the interface config:
R3#sh run int ser 0
Building configuration...
Current configuration:
!
interface Serial0
bandwidth 1984
ip address 10.1.10.2 255.255.255.252
no ip directed-broadcast
encapsulation frame-relay
no keepalive
frame-relay interface-dlci 100
end
R3#ping 10.1.10.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.10.2, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R3#
R3#ping 10.1.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/5/8 ms
R3#sh frame
R3#sh frame-relay map
R3#sh frame-relay map
Serial0 (up): ip 10.1.10.1 dlci 100(0x64,0x1840), dynamic,
broadcast,
Maybe it works with a trick.
Have somebody a soutlion for me ?
Markus
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:41 GMT-3