Cisco 4006

From: Bob Woodson (woodso_b@xxxxxxxxx)
Date: Wed Apr 04 2001 - 11:27:11 GMT-3

• Next message: Rodgers Moore: "Re: Ospf command ..."
• Previous message: Mark Salmon: "Re: IP addressing in the lab"
• Next in thread: Merrill, James D. (AIT): "RE: Cisco 4006"
• Maybe reply: Merrill, James D. (AIT): "RE: Cisco 4006"
• Maybe reply: Bob Zink: "RE: Cisco 4006"
• Maybe reply: Sumeet Gohri: "RE: Cisco 4006"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I have a scenario where a 3com Netbuilder Router has
been replaced by a Cisco 4006 switch without a routing
feature card. The routing from the 3com Netbuilder
has been moved to an existing 6509 with an MSFC.
Users who now traverse the 4006 to get to Citrix and
AS400/Notes servers off of the 6509 are unable to
connect or login. They either hang or timeout. Ip
connectivity (pings, traceroutes) to those servers
works fine. The 3com Netbuilder was also configured
with ip forwarding for udp ports 67, 68, 137, 138.
This is on by default on the 4006. Ip helper
addresses have also been configured on the 4006. Any
ideas?

• Next message: Rodgers Moore: "Re: Ospf command ..."
• Previous message: Mark Salmon: "Re: IP addressing in the lab"
• Next in thread: Merrill, James D. (AIT): "RE: Cisco 4006"
• Maybe reply: Merrill, James D. (AIT): "RE: Cisco 4006"
• Maybe reply: Bob Zink: "RE: Cisco 4006"
• Maybe reply: Sumeet Gohri: "RE: Cisco 4006"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:40 GMT-3