From: Daniel C. Young (danyoung99@xxxxxxxxxxxx)
Date: Mon Apr 02 2001 - 15:10:37 GMT-3
I did this lab. My serial link has a cost of 64. The ethernet link has a
cost of 10. As is, the cost shows as 74. I changed the cost on the ethernet
interface to 1 using:
'ip ospf cost 1'
This should work. I did have a major problem w/ routing loops in this lab,
though.
Daniel Young
Sr. Network Engineer
Internet Data Center
SBC Service Inc. - ITO
(949) 221-1928 Office
(714) 350-8945 Cell
ICQ# 109846891
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
EdmondsSG@aol.com
Sent: Wednesday, March 28, 2001 12:39 PM
To: ccielab@groupstudy.com
Subject: bootcamp lab 5 - uh? come back brain.....
hi folks,
My brain has finally left my body trying to rack this one out - any hints or
shoves in the right direction would be appreciated:
8 - configure r5 such that the only route on R6 for the 137.20.0.0 net.
appears as follows: O 137.20.20.0 [110/65] via 172.168.100.5 00:51:03 serial
0
The hint on the lab relates to the value 65 so i guess i have to change the
metric advertised to R6 somehow?
cheers
Simon
PS anyone got their lab booked for Brussells 26/27 june?
**NOTE** All LAB SWAP messages should now be sent to the
LAB SWAP Message board on groupstudy.com.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:38 GMT-3