From: Chuck Larrieu (chuck@xxxxxxxxxxxxx)
Date: Sun Apr 01 2001 - 04:58:09 GMT-3
The correct command is "no frame-relay inverse-arp"
Not sure if this works on the frame switch itself - does on mine, but I
haven't tested the implications.
HTH
Chuck
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
RAMIL
Sent: Saturday, March 31, 2001 8:29 PM
To: ccielab@groupstudy.com
Subject: frame inverse arp
can't turn off inverse arp on 2611 with two WIC 2A/S modules acting as the
frame switch. IOS 2600-js56i-mz.120-3c.bin is on the 2611 with 32MB DRAM
and
8MB Flash.
Tried:
"no inverse-arp" and "frame map..." on the interface of spoke routers.
a 2504, 2501, and 2516.
No Luck.
How come?
Thanks In Advance.>:-^
**NOTE** All LAB SWAP messages should now be sent to the
LAB SWAP Message board on groupstudy.com.
**NOTE** All LAB SWAP messages should now be sent to the
LAB SWAP Message board on groupstudy.com.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:37 GMT-3