Re: frame inverse arp

From: Michel GASPARD (mgaspard@xxxxxxxxx)
Date: Sun Apr 01 2001 - 05:20:37 GMT-3

• Next message: fwells12: "Re: BGP/Community No-export"
• Previous message: phoenixchen@xxxxxxxxxxx: "a question about "dlsw icanreach""
• Maybe in reply to: RAMIL: "frame inverse arp"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
Ramil,

I am usually using:

no frame-re inverse-arp ip <DLCI>

On the interfaces I want to stop the inverse ARP look-up.

Another, more drastic possibility is to shut down the LMI discussion,
with a

"no frame-relay lmi-type ansi"

Regards,

Michel

RAMIL wrote:
>
> can't turn off inverse arp on 2611 with two WIC 2A/S modules acting as the
> frame switch. IOS 2600-js56i-mz.120-3c.bin is on the 2611 with 32MB DRAM and
> 8MB Flash.
>
> Tried:
>
> "no inverse-arp" and "frame map..." on the interface of spoke routers.
> a 2504, 2501, and 2516.
>
> No Luck.
>
> How come?
>
> Thanks In Advance.>:-^
> **NOTE** All LAB SWAP messages should now be sent to the
> LAB SWAP Message board on groupstudy.com.
**NOTE** All LAB SWAP messages should now be sent to the
LAB SWAP Message board on groupstudy.com.

• Next message: fwells12: "Re: BGP/Community No-export"
• Previous message: phoenixchen@xxxxxxxxxxx: "a question about "dlsw icanreach""
• Maybe in reply to: RAMIL: "frame inverse arp"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:37 GMT-3