From: Larry Roberts (lroberts22@xxxxxxxxxx)
Date: Fri Mar 02 2001 - 20:37:33 GMT-3
Hi gang,
The built in 10/100 FE port on the 262x does support ISL.
Larry R.
----- Original Message -----
From: "Christopher M. Heffner" <cheffner@certified-labs.net>
To: "Bownds, Clayton" <Clayton.Bownds@getronics.com>; "Jason1"
<jason1@v-labs.net>; <ccielab@groupstudy.com>
Sent: Friday, March 02, 2001 1:43 PM
Subject: RE: FW: 2613....
> According to the HW-SW Matrix and all product documenation that I can
> find - the Fast-Ethernet module is NOT support in any of the 2600 series
> routers. It is support in the 3600 series routers only. At least
> currently ...
>
> 2600 series will support either the NM-1E or NM-4E only in slot 1.
>
> HTH,
>
> Christopher M. Heffner
> IMCR Course Director
> Certified Cisco Systems Instructor
> CCSI, MCT, MCNI, CLI, ASE, CTT, A+
> cheffner@certified-labs.net
>
>
> -----Original Message-----
> From: Bownds, Clayton [mailto:Clayton.Bownds@getronics.com]
> Sent: Friday, March 02, 2001 3:18 PM
> To: 'Jason1'; Bownds, Clayton; ccielab@groupstudy.com
> Subject: RE: FW: 2613....
>
>
> you're right and I think I wasn't clear before... *in reference to your
> question*, the only 2600's that support FastEthernet are 2620, 21, 50,
> and
> 51... you can put a NM-1FE in any 2600, but you can't trunk or
> channel...
> actually, someone speak up if you know otherwise, but I think the fact
> that
> normal traffic can be passed on a NM-1FE in a 261x router in the series
> is
> not actually supposed to work. Check it out:
> http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
> (requires CCO login)
>
> -c
>
>
> -----Original Message-----
> From: Jason1 [mailto:jason1@v-labs.net]
> Sent: Friday, March 02, 2001 1:58 PM
> To: Bownds, Clayton; ccielab@groupstudy.com
> Subject: Re: FW: 2613....
>
>
> No.. These comes with BUILT-IN FastE, but 261x also supports FastE..
> Only
> prob is that I don't think it supports ISL , not even with FastE...
> Of course.. I may be wrong and that some new IOS updates fixed that...
> etc...
>
>
> ----- Original Message -----
> From: "Bownds, Clayton" <Clayton.Bownds@getronics.com>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, March 03, 2001 3:43 AM
> Subject: FW: FW: 2613....
>
>
> > .
> >
> > -C
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
> Of
> > > Steven Weber
> > > Sent: Wednesday, February 28, 2001 5:01 PM
> > > To: CCIE GROUP
> > > Subject: 2613....
> > >
> > >
> > >
> > > can I put a nm-1fe into a 2613 to do trunking?
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:18 GMT-3