From: Jason1 (jason1@xxxxxxxxxx)
Date: Sat Mar 03 2001 - 01:08:13 GMT-3
We know that.
----- Original Message -----
From: "Larry Roberts" <lroberts22@uswest.net>
To: "Christopher M. Heffner" <cheffner@certified-labs.net>; " Bownds,
Clayton" <Clayton.Bownds@getronics.com>; " Jason1" <jason1@v-labs.net>;
<ccielab@groupstudy.com>
Sent: Saturday, March 03, 2001 7:37 AM
Subject: Re: FW: 2613....
> Hi gang,
>
> The built in 10/100 FE port on the 262x does support ISL.
>
> Larry R.
>
>
> ----- Original Message -----
> From: "Christopher M. Heffner" <cheffner@certified-labs.net>
> To: "Bownds, Clayton" <Clayton.Bownds@getronics.com>; "Jason1"
> <jason1@v-labs.net>; <ccielab@groupstudy.com>
> Sent: Friday, March 02, 2001 1:43 PM
> Subject: RE: FW: 2613....
>
>
> > According to the HW-SW Matrix and all product documenation that I can
> > find - the Fast-Ethernet module is NOT support in any of the 2600 series
> > routers. It is support in the 3600 series routers only. At least
> > currently ...
> >
> > 2600 series will support either the NM-1E or NM-4E only in slot 1.
> >
> > HTH,
> >
> > Christopher M. Heffner
> > IMCR Course Director
> > Certified Cisco Systems Instructor
> > CCSI, MCT, MCNI, CLI, ASE, CTT, A+
> > cheffner@certified-labs.net
> >
> >
> > -----Original Message-----
> > From: Bownds, Clayton [mailto:Clayton.Bownds@getronics.com]
> > Sent: Friday, March 02, 2001 3:18 PM
> > To: 'Jason1'; Bownds, Clayton; ccielab@groupstudy.com
> > Subject: RE: FW: 2613....
> >
> >
> > you're right and I think I wasn't clear before... *in reference to your
> > question*, the only 2600's that support FastEthernet are 2620, 21, 50,
> > and
> > 51... you can put a NM-1FE in any 2600, but you can't trunk or
> > channel...
> > actually, someone speak up if you know otherwise, but I think the fact
> > that
> > normal traffic can be passed on a NM-1FE in a 261x router in the series
> > is
> > not actually supposed to work. Check it out:
> > http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
> > (requires CCO login)
> >
> > -c
> >
> >
> > -----Original Message-----
> > From: Jason1 [mailto:jason1@v-labs.net]
> > Sent: Friday, March 02, 2001 1:58 PM
> > To: Bownds, Clayton; ccielab@groupstudy.com
> > Subject: Re: FW: 2613....
> >
> >
> > No.. These comes with BUILT-IN FastE, but 261x also supports FastE..
> > Only
> > prob is that I don't think it supports ISL , not even with FastE...
> > Of course.. I may be wrong and that some new IOS updates fixed that...
> > etc...
> >
> >
> > ----- Original Message -----
> > From: "Bownds, Clayton" <Clayton.Bownds@getronics.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Saturday, March 03, 2001 3:43 AM
> > Subject: FW: FW: 2613....
> >
> >
> > > .
> > >
> > > -C
> > >
> > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf
> > Of
> > > > Steven Weber
> > > > Sent: Wednesday, February 28, 2001 5:01 PM
> > > > To: CCIE GROUP
> > > > Subject: 2613....
> > > >
> > > >
> > > >
> > > > can I put a nm-1fe into a 2613 to do trunking?
> > >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:19 GMT-3