From: David FAHED (dfahed@xxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 20:29:55 GMT-3
I just begin in multicasting...
1) The lab say configure multicast R1,R2....
No problem ip multicast-routing
and on the interface ip pim dense-mode
2) Rx should explicity join the group 229.2.2.2
no problem ip igmp join-group 229.2.2.2
3)Configure the catalyst to be able to see R1 and R2 are multicast router but n
o R3
and configure catalyst to send traffic to 229.2.2.2
Some useful link or explain will be welcome...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:04 GMT-3