From: Niall El-Assaad (nelassaa@xxxxxxxxx)
Date: Tue Feb 27 2001 - 19:27:56 GMT-3
Not sure I understand fully what you mean, but the Catalyst uses CGMP to see
which devices need multicast traffic.
=======================================================
Niall El-Assaad, Systems Engineer
EMEA-UK Retail Finance North
C i s c o S y s t e m s Mobile: +44 (0)772 088 4650
VMail: +44 (0)208 734 4206
| | Fax: +44 (0)161 864 4508
| |
||| |||
.:|||||:..:|||||:. E-mail: nelassaa@cisco.com
------------------ Web : http://www.cisco.com
Eagle Court, Concord Business Park,
Threapwood Road, Manchester, M22 ORR, United Kingdom
========================================================
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
David FAHED
Sent: 26 February 2001 23:30
Cc: ccielab@groupstudy.com
Subject: Trying simple LAB multicasting
I just begin in multicasting...
1) The lab say configure multicast R1,R2....
No problem ip multicast-routing
and on the interface ip pim dense-mode
2) Rx should explicity join the group 229.2.2.2
no problem ip igmp join-group 229.2.2.2
3)Configure the catalyst to be able to see R1 and R2 are multicast router
but no R3
and configure catalyst to send traffic to 229.2.2.2
Some useful link or explain will be welcome...
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:08 GMT-3