From: MASK (afaqk@xxxxxxxxxxxxxx)
Date: Mon Feb 26 2001 - 20:16:31 GMT-3
WOW!
thats the best answer so far, and i think it's
definitely gonna give me acces to enable mode on this
buggy router!
Thx
--- Rodgers Moore <rodgers@the-moores.org> wrote:
> You do have a problem. The only thing I can think
> of is for you to
> steal the nvram from a good 2501 with a working AUX
> config and put it
> into the non-working router. It's been so long
> since I've looked into a
> 2501, I can't remember if this is possible.
>
> So, the questions now are: is the nvram soldered in
> or socketed? Do you
> have another 2501?
>
> The next option is component level repair of the
> console port. ie.
> replace the UART chip & check continuity of the
> solder joints.
>
> Another thought, sometime the pins on an RJ port get
> bent up or sideways
> and don't make a connection. Have you checked the
> console for bent
> pins?
>
> Rodgers Moore
>
> MASK wrote:
>
> > hi,
> >
> > I've a router (2501), whose Console port is
> faulty,
> > and its AUX port has an unknown password set onto
> it,
> > and to make the matter worse its all interfaces
> are
> > shut down, so we cant even telnet to it!!
> >
> > anyone has got any clue??? how can i make this
> router
> > usable?
> >
> > i know many gr8 minds are on this list!!
> >
> > thanks
> >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:29:04 GMT-3