From: McCoy, Jeffery (jmccoy@xxxxxxxxxxxxxxxxx)
Date: Wed Feb 07 2001 - 11:06:49 GMT-3
Is there any way to clear a dynamic ipx sap table from a router...something
similar to clear ipx route *
I didnt see anything in IOS...but thought Id ask.
Situation is as follows...
WAN---R1---eth
| |
R2 R3
R1 learns of several saps from the WAN....filter on R1 so that sap 1 is not
seen by R2 or R3.
on R1....
access 1000 den nnn.hhhh.hhhh.hhhh 0
access 1000 per -1
int e0
ipx output-sap-filter 1000
this works fine....however, due to impatience on my part I didnt realize it
was working for quite a while....I had to wait for the IPX timeout value to
expire before the sap was removed from R2 or R3. If I could clear them
somehow..I would have saved myself a lot of head scratching....any thoughts?
Thanks.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3