From: Nodir Nazarov (nodir@xxxxxxxxxxxx)
Date: Wed Feb 07 2001 - 11:50:55 GMT-3
I have on 12.0(7)T on c2620
R1-2620-1#clear ipx ?
accounting Clear IPX accounting database
cache Clear IPX fast switching cache
eigrp Clear NOVELL-EIGRP
nhrp NHRP cache
nlsp NLSP
route Remove IPX routing table entry
sap Remove IPX Service Information Table entry
spx-spoof Clear IPX SPX Spoof table
traffic Clear IPX traffic statistics
Nodir
On Wed, 7 Feb 2001, McCoy, Jeffery wrote:
>
> Is there any way to clear a dynamic ipx sap table from a router...something
> similar to clear ipx route *
>
> I didnt see anything in IOS...but thought Id ask.
>
> Situation is as follows...
>
> WAN---R1---eth
> | |
> R2 R3
>
> R1 learns of several saps from the WAN....filter on R1 so that sap 1 is not
> seen by R2 or R3.
>
> on R1....
> access 1000 den nnn.hhhh.hhhh.hhhh 0
> access 1000 per -1
>
> int e0
> ipx output-sap-filter 1000
>
> this works fine....however, due to impatience on my part I didnt realize it
> was working for quite a while....I had to wait for the IPX timeout value to
> expire before the sap was removed from R2 or R3. If I could clear them
> somehow..I would have saved myself a lot of head scratching....any thoughts?
>
> Thanks.
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:28:40 GMT-3